PRODUCTS & OPTIONS

Model "A" – Angle Type ESV
.....Angle Type, 2" (50 - 500 PSI) Threaded, Flanges Optional
Model "B" – Offset Inline Type ESV
.....Offset Inline Type, 2" to 12" (100 - 2,500 PSI) Flange Fittings
Model "C" – Angle Type ESV
.....Angle Type, 1" to 4" (1,000 - 6,600 PSI) Texas Eastman Special for Reactor Heat
.....Exchanger Protection
Model "D" – Inline Type ESV
.....Inline Type, 2" (50 - 1,440 PSI) 150#, 300#, 600# Flanges
Model "E-A" – Inline, Ball Valve Type ESV
.....Ball Valve Type, 1" - 12" (100 - 3,000 PSI) 150#, 300#, 600#,
.....900#, 1500# Flanges, Rupture Pin Actuator
Model "E-B" – Inline, Ball Valve Type ESV
.....Ball Valve Type, 1" - 12" (100 - 3,000 PSI) 150#, 300#, 600#,
.....900#, 1500# Flanges, Rupture Pin Pilot to Actuator
---- updating soon ---- Model "F-A" – Butterfly Valve Type ESV
.....Butterfly Valve Type, 1" – 96", 150#, 300#, 600# Flanges – Rupture Pin Actuator
Model "F-B" – Butterfly Valve Type ESV
.....Butterfly Valve Type, 1" – 96", 150#, 300#, 600# Flanges – Rupture Pin Pilot to Actuator
Model "G" – 1" – 4" Inline Type ESV for Cryogenic Applications
.....Angle and Inline Type, 1/4" to 4" (10-100 PSI) NPT or Flanges
Model "H" – Inline Dual Filter with Automatic Switchover
.....Inline Dual Filter, 1/4" to 6" (10 - 100 PSI Differential Pressure, Line Pressure to 3,000 PSI)
Model "I" – Angle Switchover Valve for External Filters
.....Angle Switchover Valve, 1" to 6" (10 - 100 PSI Differential Pressure, Line Pressure to 3,000 PSI)
Model "J-A" – Inline Check Valve Type ESV
.....Inline Check Valve Type, 2" to 6" (30 - 1,440 PSI) Flowing Pressure Only, 150#,
.....300#, 600# Flanges
---- updating soon ---- Model "J-B" – Inline Check Valve Type High and Low ESV
.....Inline Check Valve Type, 2" to 6" (Low Range 10 - 100 PSI / High Range 30 to 1440 PSI)
.....Simultaneous High and Low protection with a single pin, 150#, 300#, 600# Flanges
Model "K" – Two-Position, Five-Way Valve with Rupture Pin Actuator (Multi-Port Spool Valve)
.....Two-Position, Five-Way Valve, 1/4" to 1" (40 - 150 PSI Instrument Air) (5 - 3,000 PSI
.....Pressure or Differential Pressure Actuator)
---- updating soon ---- Model "L-A" Flow Diverter Ball Valve Type
.....Flow Diverter Ball Valve Type, 1" - 12" (100 - 3,000 PSI) 150#, 300#, 600#, Two-Position,
.....3 or 4-Way Ball Valve, threaded or flanged using a Rupture Pin Actuator.
Model "L-B" Flow Diverter Ball Valve Type
.....Flow Diverter Ball Valve Type, 1" - 12" (100 - 3,000 PSI) 150#, 300#, 600#, Two-Position,
.....3 or 4-Way Ball Valve, threaded or flanged using a Rupture Pin Pilot to Actuator.
Model "N-A" – Excess Pressure Monitor
.....Indicates when maximum allowable working pressure has been exceeded
Model "W-A" – Actuator Pilot for a Single Set Pressure Source
.....Actuator pilot for contaminated fluids using instrument air, or clean fluids to the main
.....valve actuator
Model "W-B" – Actuator Pilot for a Differential Set Pressure Source
.....Actuator pilot for contaminated fluids using instrument air, or clean fluids to the main
.....valve actuator


OPTIONS

Proximity Sensor
.....Remote indication of closing.
Fire Safe Closing
.....Enables pin to release from holding nut to close valve in case of fire.
Pin Storage Container (at the valve)
.....Container bolted to valve that gives you quick and easy access to replacement pins.
Poco Pin System
.....This easy-to-use system allows you to change the set pressure by changing pins.
Pin Guard
.....Protects the pin from any external forces that might cause the pin to buckle early.